Flocking cloth
1. Production process: Flocking is the use of the physical property of the attraction of opposite sexes, so that the fluff is negatively charged, and the fabric that needs to be flocked is placed under the condition of zero potential or grounding, and the fluff is attracted by the plant body by the different potential. It is accelerated vertically to the surface of the object that needs to be flocked. Since the plant body is coated with adhesive, the fluff is vertically adhered to the plant body.
2. Advantages: strong three-dimensional sense, bright color, soft hand feeling, good color fastness, friction resistance, smooth and seamless.
3. Cleaning method: pay attention when cleaning, do not soak it in water to rub or brush it, just use cotton gauze dipped in alcohol or gasoline to gently wipe it. If the flannel is too wet, do not twist it hard to avoid The fluff is lost, affecting the appearance.
The correct cleaning method should be to use both hands to remove moisture or let it dry naturally, and brush the fluff in one direction, so that the original appearance of the flock can be maintained.
cut flannel
1. Production process: The characteristic of cut fleece is that the grey fabric is double-layered when weaving. After weaving is completed, it is cut from the middle by cutting to produce the middle suede. Because the fleece is obtained by cutting the sheet, the fleece itself is not very strong, so there is a special brushing procedure in the finishing to fix the fleece.
The easiest way to test the quality of the flannel is to gently rub with your fingers on the back of the flannel, and the quality is good if it does not fall off.
2. Advantages: The cut velvet has a uniform suede surface, good gloss, comfortable velvet feeling, wear-resistant and easy to clean.
3. Cleaning method: Do not rub or scrub in water, just use cotton gauze dipped in alcohol or gasoline to wipe gently. If the flannel is too wet, do not twist it hard, so as not to lose the fluff and affect the appearance.
The correct cleaning method should be to use both hands to remove moisture or let it dry naturally. When brushing, it should be placed on a flat wooden board or table, and brushed along the texture to keep the color uniform and avoid hair on the cloth.
printing
1. Production process: Printing cloth can be divided into transfer printing, penetration printing and reactive printing according to different processes. Homes and sofas are basically made of reactive printing fabrics.
2. Advantages: colorful and bright. No ball, no burrs, not easy to deform.
3. Cleaning method: It is best to wash with cold or warm water first, and it is not suitable for soaking and washing in boiling water, and it is not suitable for stacking for too long.
Jacquard
1. Production process: The warp and weft threads are intricately woven into a raised pattern on the fabric, which is called jacquard. Two-color or even multi-color jacquard fabrics are woven with different colored yarns.
2. Advantages: full feel, thick texture, sturdy and wear-resistant, good air permeability, comfortable to sit and use, not stuffy or damp. The pattern has layers, the color is unique, and the bumps have a three-dimensional sense.
3. Cleaning method: jacquard fabrics should not be scrubbed strongly with a hard brush to avoid fluff on the cloth surface.
cotton
1. Production process: cloth woven with cotton yarn
2. Advantages: good air permeability, soft hand feeling, simple and natural appearance, soft luster, good alkali resistance and heat resistance.
3. Cleaning method: Before washing, it can be soaked in water for a few minutes, but it should not be too long to avoid damage to the color. It can be washed by hand or machine, but due to the poor elasticity of cotton fibers, do not scrub hard when washing, so as not to deform and affect the size.
When the cloth cover is washed and drained, it should be folded up, squeeze out a lot of water, or wrap it with a towel to squeeze the water, and must not twist it forcefully or hang it to dry. When drying in the sun, it should be dried with the reverse side facing out.
cotton and linen
1. Production process: It is the composition of cotton and linen, also known as cotton and linen interwoven fabric, including ramie cotton and linen cotton.
2. Advantages: good air permeability and perspiration, cotton and linen cloth can absorb sweat and micro sweat on human skin, so that the body temperature can quickly return to normal, truly achieve the effect of air permeability and sweat absorption, warm in winter and cool in summer. It is comfortable to use on the body, relieves itching, and is skin-friendly. PH value is acidic, non-irritating to the skin, in line with environmental protection and human health requirements. Anti-static, no pilling, no curling, cotton and linen cloth is sewn with pure cotton, without free charge, cotton fiber is not easy to deform, no pilling. Natural and environmentally friendly, it is a real green ecological textile. The use of cotton and linen cloth makes the human body have a warming effect, increases the microcirculation of the human body, effectively regulates the nervous system, clears the meridians, and improves the quality of sleep.
3. Cleaning method: hemp fiber is hard and has poor cohesion. It is lighter than cotton fabric when washing. Do not use a hard brush and rub hard to avoid fluff on the cloth. After washing, do not twist with force, do not scald colored fabrics with hot water, and do not expose them to sunlight to avoid fading.
Maintenance of fabric sofa
The fabric sofa should be protected from direct sunlight for a long time. It can be gently patted with a wrung towel for normal maintenance. It should be cleaned regularly. It is best to clean it with a vacuum cleaner once a week. Pay attention to cleaning between armrests, backrests and gaps, do not use a brush, to prevent damage to the thread and make the fabric fluffy.
For the local pollution of the fabric sofa, it can be cleaned with a small amount of alcohol or water, and then wiped with a towel. In order to avoid leaving imprints, it is best to wipe it from the periphery of the stain. Velvet furniture should not be dipped in water, dry cleaning should be used. Cloth covers and bushings should be dry-cleaned.
